Model: adhesive strength test accessories 
 Product Name: GX-6031 
 Design standards: GB/T6548, JIS-Z0402, CNS-3327 
 Note: this annex in the determination of a single core on both sides after the corrugated board and then paste strength, the upper and lower rows of needle inserted into the sample of corrugated trench, place the ring compression testing machine between two clips, you can test. 


 Specifications: 
 Model sample size (WDH) Weight 
 A 125 × 76 × 30mm 500g 
 B 80 * 28mm 91 × 76 × 30mm 350g 
 C 50 * 150mm 109 × 76 × 30mm 400g 

 Production based on 
 ZYD-3F3 corrugated board adhesive strength test strip device (hereinafter referred to as stripper), is based on national standards GB/T6548-1998 "corrugated board adhesive strength test" under the various technical indicators and the design and manufacture. 
 Second, the purpose and scope 
 Determination of the strippers for all types of corrugated board adhesion strength. 
 Main technical parameters 
 Sample: 25 * 100mm 
 1, bracket the upper and lower flat parallel: ≤ 0.10 mm 
 2, stripping frame the upper and lower flat parallel: ≤ 0.10 mm 
 3, long and short needle straightness: ≤ 0.10 mm 
 4, A-type corrugated long and short needle diameter: φ3 ± 0.10 mm 
 5, C, B-type corrugated long and short needle diameter: φ2 ± 0.05 mm